# Project North Star

## Project North Star

- [Project Northstar](https://docs.projectnorthstar.org/project-north-star/master.md): The future of spatial computing deserves to be open.
- [Code of Conduct](https://docs.projectnorthstar.org/project-north-star/code-of-conduct.md): By participating in the NorthStar Community, you agree to the following code of conduct.
- [Glossary](https://docs.projectnorthstar.org/project-north-star/glossary.md): A collection of terms and acronyms of varying degrees of ambiguity
- [About](https://docs.projectnorthstar.org/project-north-star/getting-started/about.md)
- [FAQ](https://docs.projectnorthstar.org/project-north-star/getting-started/faq.md): This page answers some more general northstar related questions. The other sections below it answer questions related to their respective topics.
- [Helpful Content](https://docs.projectnorthstar.org/project-north-star/getting-started/community-links.md): Pulled from the #helpful-content channel in the North Star Discord
- [Introduction](https://docs.projectnorthstar.org/project-north-star/northstar-next/introduction.md): Welcome to the next generation of open source spatial computing.
- [Assembly Guide](https://docs.projectnorthstar.org/project-north-star/northstar-next/assembly-guide.md): Early Access Documentation for the Next Generation Northstar headsets available on https://shop.combinereality.com
- [Sensor and Tracking Guide](https://docs.projectnorthstar.org/project-north-star/northstar-next/sensor-and-tracking-guide.md): The world is full of stereo cameras and sensors, this page will help you choose which one to get for your headset.
- [Getting Started with Software](https://docs.projectnorthstar.org/project-north-star/software/getting-started-with-software.md): This page goes over the general setup you should do after you've finished building and calibrating your headset.
- [Esky](https://docs.projectnorthstar.org/project-north-star/software/esky.md): Project Esky aims to be the software companion to allow development with the Deck X/North Star Display system out of the box! (Utilizing the t265/1 or a ZED system for 6DoF tracking)
- [Monado](https://docs.projectnorthstar.org/project-north-star/software/monado.md): Work In Progress documentation on how to setup
- [SteamVR](https://docs.projectnorthstar.org/project-north-star/software/steamvr.md): This page will walk you through installing and running the steamVR driver. It is currently supported on windows, with linux support in progress. A Launcher/Installer is also in progress.
- [Unity](https://docs.projectnorthstar.org/project-north-star/software/software.md): This Unity Package contains the Unity Assets, Scenes, and Pre-warping systems necessary to build Unity applications with the Project North Star headset.
- [Getting Started with Calibration](https://docs.projectnorthstar.org/project-north-star/calibration/getting-started.md): This page describes both existing calibration methods, as well as how to align the LeapMotion Controller properly.
- [Calibration Stand Bill of Materials](https://docs.projectnorthstar.org/project-north-star/calibration/getting-started/calibration-stand-bom.md)
- [3D Optical Calibration](https://docs.projectnorthstar.org/project-north-star/calibration/3d-calibration.md): The following instructions can be used for version 1 of the calibration rig
- [Bending Reality: North Star’s Calibration System](https://docs.projectnorthstar.org/project-north-star/calibration/3d-calibration/bending-reality-north-stars-calibration-system.md): http://blog.leapmotion.com/bending-reality-north-stars-calibration-system/
- [2D Optical Calibration](https://docs.projectnorthstar.org/project-north-star/calibration/2d-calibration.md): This version of the calibration system allows you to calibrate your headset with a single stereo camera
- [Calibration Stand Assembly Guide](https://docs.projectnorthstar.org/project-north-star/calibration/calibration-stand-assembly-guide.md)
- [Electronics](https://docs.projectnorthstar.org/project-north-star/electronics/electronics.md): These folders contain the Schematic, Firmware, and Bill of Materials used in building and programming the display driver board on the Project North Star AR Headset.
- [Firmware](https://docs.projectnorthstar.org/project-north-star/electronics/firmware.md)
- [Schematics](https://docs.projectnorthstar.org/project-north-star/electronics/schematics.md)
- [Combine Reality Deck X](https://docs.projectnorthstar.org/project-north-star/mechanical/combine-reality-deck-x.md): This is the homepage for the Combine Reality Deck-X variant of Northstar.
- [Deck X Assembly Guide](https://docs.projectnorthstar.org/project-north-star/mechanical/combine-reality-deck-x/deck-x-assembly-guide.md): Below is a step by step guide to assembling your Deck X HMD, each image is annotated and captioned.
- [Deck X Bill of Materials](https://docs.projectnorthstar.org/project-north-star/mechanical/combine-reality-deck-x/deck-x-bill-of-materials.md): This page details the Bill of Materials from Smart Prototyping, it also includes the ID numbers for the 3D printed parts to make them easier to find in the GitHub repository.
- [Headgear Assembly Guide](https://docs.projectnorthstar.org/project-north-star/mechanical/headgear-assembly.md): This page was contributed by Guillermo Guillesanbri.
- [Northstar Release 3](https://docs.projectnorthstar.org/project-north-star/mechanical/release-3.md): This folder contains the mechanical assets necessary to build a Project North Star AR Headset with calibration stand.
- [Release 3 Bill of Materials](https://docs.projectnorthstar.org/project-north-star/mechanical/release-3/headset-bom.md): A list of parts, and where to buy/order them from
- [Release 3 Assembly Guide](https://docs.projectnorthstar.org/project-north-star/mechanical/release-3/headset-assembly.md)
- [Changelog](https://docs.projectnorthstar.org/project-north-star/mechanical/release-3/changelog.md): All notable Mechanical changes will be documented in this file.
- [Northstar Release 1](https://docs.projectnorthstar.org/project-north-star/mechanical/northstar-v1.md)
- [Initial Release 3D Printing Reference](https://docs.projectnorthstar.org/project-north-star/mechanical/northstar-v1/initial-release-3d-printing-reference.md): Pulled from https://leapmotion.github.io/ProjectNorthStar/3dprints.html
- [Initial Release Assembly Guide](https://docs.projectnorthstar.org/project-north-star/mechanical/northstar-v1/initial-release-assembly-guide.md): Pulled from https://leapmotion.github.io/ProjectNorthStar/mechanical.html
- [FAQ Mechanical](https://docs.projectnorthstar.org/project-north-star/mechanical/faq-mechanical.md)
- [FAQ Ahead.IO Kits](https://docs.projectnorthstar.org/project-north-star/faq-and-vendors/faq-ahead.io-kits.md): This page is intended to be specifically about the purchasable kits, there will be some overlap with general FAQ. Check the sidebar on the right to jump to the correct question
- [Unveiling Project North Star](https://docs.projectnorthstar.org/project-north-star/blogs/blogs.md): http://blog.leapmotion.com/northstar/
- [Our Journey to the North Star](https://docs.projectnorthstar.org/project-north-star/blogs/our-journey-to-the-north-star.md): http://blog.leapmotion.com/our-journey-to-the-north-star/
- [Project North Star is Now Open Source](https://docs.projectnorthstar.org/project-north-star/blogs/project-north-star-is-now-open-source.md): http://blog.leapmotion.com/north-star-open-source/
- [Project North Star: Mechanical Update 1](https://docs.projectnorthstar.org/project-north-star/blogs/project-north-star-mechanical-update-1.md): http://blog.leapmotion.com/project-north-star-mechanical-update-1/
- [Project North Star: Mechanical and Calibration Update 3.1](https://docs.projectnorthstar.org/project-north-star/blogs/project-north-star-mechanical-and-calibration-update-3.1.md): http://blog.leapmotion.com/project-north-star-mechanical-and-calibration-update-3-1/
- [Project North Star: Mechanical Update 3](https://docs.projectnorthstar.org/project-north-star/blogs/project-north-star-mechanical-update-3.md): http://blog.leapmotion.com/project-north-star-mechanical-update-3/