# Deck X Bill of Materials

### Mechanical Parts (Excluding 3D printed parts

| Part Name                                                       | Quantity | Kit  A | Kit B | Kit C | Upgrade Kit | Rebuild Kit |
| --------------------------------------------------------------- | -------- | ------ | ----- | ----- | ----------- | ----------- |
| Spring Left (0.304-in OD Torsion Spring 180 Deg. L-Hand Wound)  | 1        | √      | √     | √     |             |             |
| Spring Right (0.304-in OD Torsion Spring 180 Deg. R-Hand Wound) | 1        | √      | √     | √     |             |             |
| M2.5x0.45 6mm Long Steel Flat Head Screw 90 Deg CS              | 14       | √      | √     | √     | √           | √           |
| M2.5x0.45 5mm Long Button Head Socket Screw                     | 16       | √      | √     | √     | √           | √           |
| M4x0.7 20mm Steel Button Head Socket Screw                      | 2        | √      | √     | √     | √           | √           |
| M4x0.7 Zinc Plated Nylon Insert Hex Lock Nut                    | 2        | √      | √     | √     | √           | √           |
| M2 8mm Long Thread-Forming Screws for Plastic                   | 25       | √      | √     | √     | √           | √           |
| M1.4 6mm Long Thread-Forming Screws for Plastic                 | 4        | √      | √     | √     | √           | √           |
| 8x16x2mm Rubber Washer                                          | 2        | √      | √     | √     |             |             |
| M2.5x0.45 3.4mm Long Heat-Set Insert for Plastics               | 24       | √      | √     | √     |             | √           |
| 3x10x165mm 6061 Aluminum Bar Slide (Pre-Drilled & Threaded)     | 2        | √      | √     | √     |             |             |
| Gen 2 Welding Headgear                                          | 1        | √      | √     | √     |             |             |
| Foam Forehead Padding (Pre-Cut)                                 | 1        | √      | √     | √     |             |             |
| Thin Foam for Forehead Padding (Pre-Cut)                        | 1        | √      | √     | √     |             |             |
| Thin Foam for Facial Interface (Pre-Cut)                        | 1        | √      | √     | √     |             |             |
| 2mm Thick Self-Stick Anti-Skid Rubber 3M Tape (Pre-Cut)         | 4        | √      | √     | √     |             |             |
| Zip Ties                                                        | 10       | √      | √     | √     | √           | √           |

### 3D Printed Parts- Main Assembly

| Part Name                                                 | Quantity | Kit A | Kit B | Kit C | Upgrade Kit | Rebuild Kit | ID |
| --------------------------------------------------------- | -------- | ----- | ----- | ----- | ----------- | ----------- | -- |
| Deck X Optics Bracket (Project North Star 3.2 Compatible) | 1        |       | √     | √     |             |             |    |
| Left Display Tray - 75cm Focal Depth                      | 1        |       | √     | √     |             |             |    |
| Right Display Tray - 75cm Focal Depth                     | 1        |       | √     | √     |             |             |    |
| Left Display Tray - 25cm Focal Depth                      | 1        |       | √     | √     |             |             |    |
| Right Display Tray - 25cm Focal Depth                     | 1        |       | √     | √     |             |             |    |
| Left Rotation Adjustment Slide Mount                      | 1        |       | √     | √     |             |             |    |
| Right Rotation Adjustment Slide Mount                     | 1        |       | √     | √     |             |             |    |
| Forehead Rest Base Shape                                  | 1        |       | √     | √     |             |             |    |

### 3D Printed Parts- Headgear

| Part Name                             | Quantity | Kit A | Kit B | Kit C | Upgrade Kit | Rebuild Kit | ID |
| ------------------------------------- | -------- | ----- | ----- | ----- | ----------- | ----------- | -- |
| Forehead Main Structure (Low-Profile) | 1        |       | √     | √     |             |             |    |
| Forehead Headgear Span                | 1        |       | √     | √     |             |             |    |
| Forehead Hinge Cap                    | 2        |       | √     | √     |             |             |    |
| Forehead Hinge Base                   | 2        |       | √     | √     |             |             |    |
| Rear Hinge Base                       | 2        |       | √     | √     |             |             |    |
| Rear Hinge Cap                        | 2        |       | √     | √     |             |             |    |
| Left Side Main Span With Slide Brake  | 1        |       | √     | √     |             |             |    |
| Left Brake Housing                    | 1        |       | √     | √     |             |             |    |
| Left Brake Button                     | 1        |       | √     | √     |             |             |    |
| Right Side Main Span With Slide Brake | 1        |       | √     | √     |             |             |    |
| Right Brake Housing                   | 1        |       | √     | √     |             |             |    |
| Right Brake Button                    | 1        |       | √     | √     |             |             |    |
| Slide Endcap                          | 2        |       | √     | √     |             |             |    |

### 3D Printed Parts- Deck X Addition

| Part Name                                                                        | Quantity | Kit A | Kit B | Kit C | ID |
| -------------------------------------------------------------------------------- | -------- | ----- | ----- | ----- | -- |
| Deck X D-Pad                                                                     | 1        |       | √     | √     |    |
| Deck X Button 1                                                                  | 1        |       | √     | √     |    |
| Deck X Button 2                                                                  | 1        |       | √     | √     |    |
| Deck X Lid (T261 Version)                                                        | 1        |       | √     | √     |    |
| Deck X Leap Motion Controller Mounting Spacer                                    | 1        |       | √     | √     |    |
| Mounting Bracket for North Star Integrator (T261 Version) (PETG w/ Carbon Fiber) | 1        |       | √     | √     |    |

### Electronics and Optics

| Part Name                                                     | Quantity | Kit A | Kit B | Kit C | ID |
| ------------------------------------------------------------- | -------- | ----- | ----- | ----- | -- |
| North Star Optical Combiner Set                               | 1        |       |       |       |    |
| North Star Display (3.5 inch, 1440x1600 pixels, 120fps)       | 2        |       |       |       |    |
| North Star Display Matte Overlay (1 pair)                     | 1        |       |       |       |    |
|                                                               |          |       |       |       |    |
| North Star Display Driver Board                               | 1        |       |       |       |    |
| North Star Display Driver Debug Adapter                       | 1        |       |       |       |    |
| North Star Power Stabilizer                                   | 1        |       |       |       |    |
| USB Power Adapter Board (for supplemental power if necessary) | 1        |       |       |       |    |

### Deck X Electronics

| Part Name                                                                                    |   |
| -------------------------------------------------------------------------------------------- | - |
| North Star Integrator (USB Hub System w/ Integrated Arduino and Flash Drive)                 |   |
| Leap Motion Controller to Integrator Ribbon Adapter (Micro USB to Ribbon)                    |   |
| Integrator Ribbon Adapter (NOVASTACK to Ribbon) to Intel RealSense T261 (incl. Ribbon Cable) |   |
| Micro USB 3 to Ribbon Adapter for Intel RealSense T265 (incl. Ribbon Cable)                  |   |
| Zio Qwiic 6 Button Board (incl. Jumper Wire + Qwiic Cable)                                   |   |
| Mini Fan (with custom 5cm cable)                                                             |   |

### Modules/Sensors

| Part Name              |   |
| ---------------------- | - |
| Leap Motion Controller |   |
| Intel RealSense t261   |   |

### Intel t261 Accessories

| Part Name                                          |   |
| -------------------------------------------------- | - |
| Heat Sink Set (3 pcs, 14 x 14 x 6mm)               |   |
| Thermal Grease (0.5g Syringe)                      |   |
| USB C to Intel RealSense T261 Adapter Bundle       |   |
| Micro USB 3 to Intel RealSense T261 Adapter Bundle |   |